Brass C360 Machined Parts: When Brass Is the Right Call
Brass C360 machined parts cut fast, take threads cleanly and finish well. When free-cutting brass beats aluminum or steel, and where it falls short.
Most machinists smile when a job comes in as brass. Brass C360 machined parts cut fast, break chips cleanly and come off with a nice finish, which is a big part of why fittings and small threaded parts are so often brass.
Why Is Brass So Easy to Machine, and When Should You Use It?
C360 is free-cutting brass. The lead in it breaks chips into small pieces, so tools last and cycle times stay short. Use it for small, detailed parts that need clean threads, corrosion resistance and a good finish, where the strength of steel isn't needed.
Protolabs asks this in Brass and Copper for CNC machining (explained). The chapter list includes "Brass machinability and surface finishes. We'll discuss why brass is so easy to machine," followed by tapping and facing demos.
What Makes Brass C360 Machined Parts Different
thyssenkrupp's Brass Alloy 360 data explains the chip side: the high lead content "creates machined chips which are short and easily freed from the work." Its machinability index is "arbitrarily rated at 100," and other copper alloys are compared against it.
That shows up on the machine:
- Threads tap and roll cleanly, which is why fittings and connectors are so often brass.
- Fine details like knurls hold up well. See what to put on a knurl callout.
- Short chips mean fewer stops to clear the work.
- The as-machined finish looks good with little extra work.
One catch: brass grabs drills. A standard drill can self-feed and pull in. Our post on drilling brass covers why.
When Brass Isn't the Right Call
Strength and weight. If the part carries a real load or weight matters, Aluminum 6061 or Alloy Steel 4140 is usually the better fit. Brass is heavy for its strength.
Lead content. C360 contains lead, so it isn't for drinking water or anything that needs a lead-free alloy. Check your requirements before choosing it.
Heat or electrical paths. If conductivity is the point, look at Copper C110 instead, keeping in mind it machines far less nicely. See machining Copper C110.
On our Materials page, Brass C360 is in the CNC list alongside Aluminum 6061, Stainless 304 and the rest. Our CNC quote prices material rate and machining time from the part's geometry, so a brass part's easy cutting shows up in the machining time.
Need a part made?
Upload your file for an instant price.