← All posts

Shore Hardness: What 95A Means for a Printed TPU Part

Shore hardness measures how hard a flexible material resists a dent. How the 00, A and D scales overlap, what 95A means, and what to check on TPU prints.

INTERTRONICS titled a one-minute explainer with a question every TPU datasheet raises: what is Shore hardness? The video is about adhesives, but printed TPU is sold on the same scale, so the answer carries straight over to flexible printed parts.

What Is Shore Hardness?

Shore hardness is a material's resistance to permanent indentation, read from a spring-loaded durometer pressed into the surface. The number only means something next to its scale letter, so a 95A part and a 95D part are very different materials.

In What is Shore Hardness?, Craig from INTERTRONICS walks through the scales. Shore 00 covers very soft materials, like a gel shoe insole. Shore A covers flexible materials such as silicones and harder rubbers, with car tires as his example. Shore D is for less flexible plastics, and he puts human bone at roughly D90. The scales are named after Albert Ferdinand Shore, who invented the durometer.

Where the Scales Overlap

Smooth-On's durometer Shore hardness scale shows how the scales overlap. Its example is that a 95A material is also about 45D. The printed TPUs in our earlier posts sit in the 90s on the A scale, a 92A in one and a 95A in the other, near the top of A where it starts to overlap D. Smooth-On also describes the gauge: a needle on a spring that you press firmly until it has gone as deep as it will go.

The number leaves a lot out. It's a surface indentation test, so it says nothing direct about tear strength or how a part rebounds after a long squeeze. A printed part's feel also depends on geometry as much as material. A study we covered in printed TPU lattices measured a 95 Shore A lattice far softer than the solid TPU it came from.

Putting It on a Drawing

Our post on Rockwell hardness on a drawing explains why a hardness callout works better as a range than a single number, and the same thinking helps when you write a durometer on a print. If your part is a seal, check where printed TPU gaskets work before you settle on a number.

What We Print

Thermoplastic Polyurethane (TPU) is on our Materials page for flexible parts like gaskets and grips, and our 3D printing page lists it under MJF. The exact Shore grade isn't published there, so if your design depends on a specific durometer, ask us when you quote.

Need a part made?

Upload your file for an instant price.

Start a quote