Stainless Steel Passivation: Why Machined Parts Rust
Stainless steel passivation removes free iron so the oxide layer can form. Why machined 304 and 316 parts still rust, and why passivation goes last.
A batch of Stainless 304 brackets comes off the machine looking perfect, then grows orange specks on the shelf a few weeks later. Stainless steel passivation is the first thing people ask about, and it's usually part of the answer, though rarely all of it.
Why Are My Stainless Steel Parts Rusting?
Something damaged or contaminated the thin chromium oxide layer that keeps stainless from rusting. Stainless is corrosion resistant, not corrosion proof, and machining after passivation, chlorides, or what the parts touch afterward can all break that layer.
Component Supply's Bits & Pieces podcast takes this on in Why Are My Stainless Steel Components Rusting?. The hosts say it's a question customers bring them about hypotubes and mandrels, and they walk through the causes they see most.
Chlorides come first. Salt water and saline solutions will attack stainless given enough time and heat, even after passivation, so they tell customers to test the real exposure before trusting it.
Next is work done after passivation. One of their customers bought passivated stock, ground it in-house, and got rust. The hosts are blunt about it: drilling, grinding, cutting and even rough handling compromise the passive layer, and the rust may not show for weeks.
The one people miss is everything the part touches later. Acid outgassing from curing adhesives, the wrong cleaning solvent, a wet part dropped in a bin of a different metal, and chloride-bearing paper or cardboard in the packaging all made their list.
What Stainless Steel Passivation Actually Does
It's a chemical treatment, typically citric or nitric acid, that strips free iron off the surface so a clean chromium oxide layer can form. Their shop checks it with a copper sulfate test. Anywhere that isn't passive turns copper-colored, which is easy to spot on bare stainless.
A spec many drawings cite is ASTM A967, which covers several chemical passivation treatments plus tests to confirm they worked. Naming the spec and the test beats writing "passivate" and hoping.
Passivate Last
The hosts end on the rule worth keeping: passivation should be the last process. If a part gets tapped or deburred after it's passivated, it needs to go back through.
Grade still matters. 316 vs 304 stainless covers when the molybdenum in Stainless 316 earns its price, and drilling 304 without work hardening it covers the machining side. If neither grade will survive the environment, titanium vs stainless is the next question.
Passivation isn't listed on our CNC page, so if your Stainless 304 or Stainless 316 parts need it, ask us when you quote.
Need a part made?
Upload your file for an instant price.