← All posts

Tolerance Stack-Up Analysis for Machined Assemblies

Tolerance stack-up analysis checks whether parts that each pass inspection still fit together: worst case vs RSS, and which callouts to tighten.

Every part in the box passed inspection, and the assembly still won't close. That's the problem tolerance stack-up analysis is meant to catch before anyone cuts metal.

What Is Tolerance Stack-Up Analysis, and Why Bother Doing It?

It's adding up how the tolerances on each part combine along one direction, so you know the worst gap or interference the assembly can end up with. You do it to decide which dimensions actually need tight tolerances and which can stay loose.

Kevin Kutto's video What is Tolerance stack up analysis | Why Tol stack up analysis asks exactly that. The description says stack-up "helps us to optimize dimensioning chain and tolerance on engineering drawing to achieve function with minimum manufacturing cost." That last part is the bit people skip.

How a Tolerance Stack-Up Analysis Works

Pick the gap that matters, say the clearance between a shaft shoulder and a housing face. Then walk the chain of dimensions from one side of that gap to the other, noting which ones make the gap bigger and which make it smaller.

Worst case adds every tolerance at its limit. If three parts each carry ±0.1 mm along the chain, the gap can move ±0.3 mm. Every assembly is guaranteed to work, but you pay for it.

Statistical (RSS) assumes the parts won't all land at their limits together. Enventive's explanation of worst case, RSS and Monte Carlo puts it plainly: "worst case methods often lead to costly reductions in the specified tolerance values," because all parts hitting their limits at once "is usually very low." They also note worst case still makes sense when a failure mode is safety-critical.

For a handful of prototype parts, worst case is usually the honest choice. RSS leans on process statistics a short run doesn't have.

What the Stack Tells You to Change

The useful output isn't a number. It's knowing which link in the chain is eating most of the budget.

  • Shorten the chain. Dimension the critical gap from one datum instead of through four parts.
  • Tighten only the big contributors and leave the rest at the title-block default.
  • Add adjustment, like a slotted hole or a shim, when tolerance alone gets too expensive.
  • Use position tolerances on hole patterns, as in plus/minus vs position tolerance.

On our CNC side the default is ISO 2768-m, down to ±0.01 mm where the drawing calls for it, and tighter tolerances carry a price uplift shown in the quote. A stack-up is how you know which few dimensions deserve that uplift. What an ISO 2768 title block means covers the default, and bent parts have their own stack in tolerances on a laser-cut and bent part.

Need a part made?

Upload your file for an instant price.

Start a quote