← All posts

Anodizing AlSi10Mg: Why Printed Aluminum Turns Gray

Anodizing AlSi10Mg prints gives dark gray, not bright silver, because the silicon ends up in the oxide. What that means when you plan the color of a part.

Printed aluminum looks like aluminum right up until it comes out of the anodize tank. Anodizing AlSi10Mg rarely gives the bright, even finish people expect from bar stock, and the reason is in the alloy name.

Why Did My 3D Printed Aluminum Anodize Dark Gray Instead of Silver?

Silicon. AlSi10Mg carries roughly 10% of it in a very fine network, and during anodizing that silicon gets oxidized into the film instead of staying out of the way. The result is a gray to near-black surface, not the clear finish 6061 gives.

David from Dark Art Workshop hit exactly this in DIY Anodizing Aluminum 3D Printed Parts. His metal-printed heat spreaders came out of a sulfuric bath dark gray, undyed, when he expected plain aluminum color. He guessed the other metals in the printing alloy were to blame and asked viewers for the chemical explanation. The video doesn't name the alloy, so we won't either, but the gray he got matches what the research describes for AlSi10Mg.

What Anodizing AlSi10Mg Does to the Oxide

Researchers at Vrije Universiteit Brussel have studied this closely. In a 2018 paper they found almost all of the silicon gets oxidized while additive-manufactured AlSi10Mg anodizes, which explains its lower anodizing efficiency compared to a cast alloy of about the same chemistry. A 2019 follow-up looked at heat treatment. As-printed, the silicon forms a continuous 3D network. Aging or stress-relief treatments break it into separate coarse particles, and the anodized layers came out thicker and more uniform afterward.

So the as-built print and the heat-treated print won't anodize the same, even off the same build plate.

Planning the Finish

Treat gray as the starting color. David found his parts took dye only partway, ending up dark brown, and he figured black would work fine. If the drawing calls for black, you're working with the alloy instead of against it.

If the part needs a bright clear anodize or a specific color match, that's a reason to machine it from Aluminum 6061 instead, and when DMLS beats CNC covers whether the geometry lets you. Surface prep shows through anodize too, which is the whole argument in bead blast vs tumble before anodize. For hard-wearing surfaces, Type II vs Type III is written for machined parts, and a print's silicon changes how that coating grows.

DMLS Aluminium AlSi10Mg is on our 3D printing list, and printed metal parts go through a barrel tumbler. Anodizing and heat treatment of printed parts aren't listed there, so ask us when you quote.

Need a part made?

Upload your file for an instant price.

Start a quote