Basic Dimensions: Why Boxed Numbers Carry No Tolerance
Basic dimensions are exact targets, not untoleranced numbers. A profile or position callout holds the tolerance. What a shop needs to see on the print.
Open a drawing full of boxed numbers with no ± anywhere and it's fair to wonder what you're supposed to hold. Basic dimensions aren't missing their tolerance. It lives somewhere else on the print, and if it doesn't, the drawing has a gap that someone will have to call about.
Why Are the Overall Dimensions of the Plate Basic?
Because a profile tolerance carries the tolerance, not the dimension. The boxed numbers say exactly where each surface should sit relative to the datums, and the profile callout says how far it's allowed to stray.
That's the question a viewer sent GD&T Basics about a 5.0 square plate, answered in When Should I Use Basic Dimensions. Jason, the presenter, notes the excerpt wasn't a complete drawing. Their title blocks carry an "unless otherwise specified, all surfaces" profile note, which applies profile of a surface to anything not called out in the field of view. On his second example, that general note works out to about ±.015 on each perimeter face, measured from a datum frame built on the back face and a four-hole pattern.
What Basic Dimensions Do That Plus/Minus Can't
Put a ± size on the perimeter instead and you've controlled size, nothing more. His point is that a plus/minus size dimension can't reference datums, so the whole outline could sit off to one side of the holes and still pass. Position on the midplane would fix that, but he argues most perimeters don't work as a feature of size. You care where each face sits, not where the middle of the width ends up.
The GD&T Basics explainer lays out the rules. Basics go in boxes and never carry their own tolerance, so a geometric control has to give them one. True position has to be located with them, which is where most people first meet them; plus/minus vs position tolerance covers that side. And because each basic is exact, you can add a 30 and a 15 and get exactly 45, with no stack-up between them.
What the Shop Needs to See
The drawing that causes trouble has boxed dimensions with no profile or position tied to them and no general profile note. On paper that feature has zero tolerance. If your drawings lean on a UOS profile note, check that it's actually in the title block and that it points at the datums you meant, which choosing datums helps with. If your block calls a general standard instead, ISO 2768 general tolerances explains what that number covers.
Our CNC work defaults to ISO 2768-m, down to ±0.01 mm where the drawing calls for it. If you want profile results reported against your basic dimensions, ask us when you quote.
Need a part made?
Upload your file for an instant price.