Woodruff Keys: How They Work and How to Spec the Seat
A Woodruff key is a half-round key that sits in a plunge-cut seat in the shaft. How it works, how the size numbers read, and what to put on the drawing.
A Woodruff key shows up on small shafts and old machine tools, and people who've never cut one tend to ask the same thing a WDS Components video title asks: how do they work? The short version is that the shaft does most of the locating, and the seat is a single plunge cut.
Woodruff Keys: How Do They Work?
A Woodruff key is a half-round disc that drops into a matching half-moon pocket in the shaft, with the flat top sticking up into a straight keyway in the hub. It aligns the hub on the shaft and carries torque between them, the same job as a square parallel key.
The difference is in how the seat gets made. As the Fredumacation video Woodruff Keys explains, you plunge a Woodruff cutter of the right size straight into the shaft to the required depth. No end mill tracking along the shaft, no runout at the end of the slot. The keys themselves are cheap because they're parted off standard round stock on a lathe and cut in half.
Wikipedia's entry on the Woodruff key adds the design reason. Because the seat is cut with a circular plunge, you don't have to mill near a shaft shoulder, where stress concentration and concentricity suffer. The tighter fit also cuts down on play.
Reading a Woodruff Key Size
Inch keys use a number code. The last two digits are the diameter in eighths of an inch, and the digits in front are the width in thirty-seconds. So a 406 is 1/8 in wide by 3/4 in diameter, per the video. Metric keys are called out by width, height and diameter, and the seat can be cut to normal, close or free fit classes.
The seat and hub keyway widths come from the standard tables for that key, not from the key's nominal size. In the video's 404 example the shaft seat runs 0.124 to 0.1255 in wide while the hub keyway is 0.126 to 0.128 in.
What to Put on the Drawing
Call out the key number (or metric size and fit class) and let the table drive the seat. The video's best shop-floor tip is to add a reference dimension over the key, measured with the key in the seat, with a max and min. An inspector can check that with a mic in seconds instead of chasing seat depth on a curved bottom.
If the hub needs a blind keyway, read our post on the blind keyway in a bore. For other internal forms, see rotary broaching. And if the hub is a bearing seat, check bearing housing fit before you finalize the bore.
What We'd Do on Your Part
Our CNC cell runs a Haas 5-axis mill and a dual-spindle lathe with live tooling, and an engineer reviews every quote. Keyseats aren't listed on the CNC page by name, so if your shaft needs one, ask us when you quote.
Need a part made?
Upload your file for an instant price.